Deer eyes

Submitted by John K on 2/8/02. ( )

Just finished the eyes for my first mount.

I'm please with the result except I would like to have
a wet look on the lids.
What should I use

Return to Beginners Category Menu

Heres a couple........

This response submitted by Dave B. on 2/8/02. ( )

You can use Gary Bowen's "Super Fish Gloss" or even "Crylon Clear Enamal". Spray a bit into a cup and apply with a brush.
You can clean your brush with Laquor Thinner.
Works great!

Have a good weekend,

Thanks Dave

This response submitted by John K on 2/8/02. ( )


Another way

This response submitted by Leanna on 2/8/02. ( )

Spray gloss thru your airbrush so you hit only the lids, then clean the eye of overspray. I've had problems with applying gloss with a paint brush, because it tends to remove some of the paint on the lid, during the applying of the gloss. Did that make sense?!

Thanks Leanna

This response submitted by John K on 2/8/02. ( )

Makes sense


This response submitted by Bonnie Z on 2/8/02. ( )

I think what you are trying to achieve is moisture in the lower eye (at least thats what I hope you want) Very simple procedure. After painting and cleanup place a drop of modpodge in corner of eye and with thin paintbrush smooth out along lower lid..leaving a slight bit more in corner. Hope this helps.


This response submitted by John K on 2/8/02. ( )

I'm learning there is more than 1 way to skin a cat
(no pun intended)

I used..

This response submitted by Amy on 2/8/02. ( )

Plasti-Kote, ordered from Van Dykes. I used this on the nose, too.

Return to Beginners Category Menu