Submitted by Tim on 9/1/99. ( musky2206@aol.com ) 152.163.232.25
hi just starting ari brushing im 20 years old I allready have a ari compressor that i use with nail guns will that be ok do i need any speacial attachments to go with it
Return to Beginners Category Menu
This response submitted by carl on 9/1/99. ( ) 209.47.43.206
check to see if your compressor has oil in the tank, as long as it doesn't have any oil in the tank then all you need is a water trap to put in your air line.
This response submitted by John C on 9/1/99. ( ) 204.180.103.59
A quality searater cost abour $70.00 these will separate both oil and water. I like to use a throw away filter at the small hose connection. these are about $3.00 at the auto paint store. Then as a additional measure I use a PASCHE' moisture trap available from WASCO. I know this seems and sounds like a OVERKILL, but I have NEVER had any oil or water problems using this method. Even with high humidity. I was shown this many years ago by a body and paint man. It still works for me. Good luck John C
This response submitted by Tim on 9/1/99. ( musky2206@aol.com ) 152.163.232.26
Thanks a whole bunch where do i buy a searator
This response submitted by John C on 9/2/99. ( ) 204.180.103.5
I have seen them at auto PAINT supply stores see local yellow pages and I know GRANGERS has them. I can t find the phone # for Grangers at this time. Someone here possibley has it.
Return to Beginners Category Menu