FIRBEE HEADS

Submitted by GOOSE2DUCK on 01/27/2004. ( ) 63.174.244.87

DO YOU HAVE TO PREP THE FIRBEE HEADS BEFORE AIR-BRUSHING THEM? MY PAINT CAN BE RUBBUED RIGHT OFF OF THEM. I SRAY PRIMER ON THEM FIRST THEN I USE THE HYDRO MIST FROM McKenzie.... :(

Return to Bird Taxidermy Category Menu

Try

This response submitted by Paul Miller on 01/27/2004. ( ) 205.188.209.13

After painting you must topcoat with Krylon matte finish

thank you

This response submitted by goose2duck on 01/27/2004. ( ) 63.174.244.87

big help

wipe them down

This response submitted by mike on 01/28/2004. ( msduckhunt at bellsouth.net ) 68.19.172.74

i always take some fine steel wool and rough up the surface a little bit and then wipe it down with lacquer thinner seems to help hydro-mist paints stick a little better after painting definately do as paul says with the krylon matte finish

Return to Bird Taxidermy Category Menu