Bondo ears

Submitted by Tim on 10/17/05 at 2:18 PM. ( buufarm@citlink.com ) 67.136.100.250

Have a question on using the bondo ear method..I've checked archives, mags, & other literature bt cant find the answer..

What I want to know is, which hardener do you use, the bondo or fiberglass resin?

when I used to use this method, I used the bondo hardener but I have never seen anywhere which one is proper to use..
Thanx

Return to Gamehead Taxidermy Category Menu

Go to the Taxidermy industry page

This response submitted by joey arender on 10/17/05 at 2:30 PM. ( j32a@aol.com ) 205.188.117.14

and scroll down to bondo/resin? for your answer

the answer is

This response submitted by Mr.T on 10/17/05 at 9:37 PM. ( ) 64.31.6.136

The bondo hardner is for bondo. You can even mix a little glass resin in with the bondo to make it easyer to pour. It takes very little glass resin to thin it out, and will slow the bondo hardner a little to give you time to work.

Thanx

This response submitted by Tim on 10/18/05 at 10:11 AM. ( ) 67.136.100.250

for the help

OR YOU CAN USE 5 MINUTE EPOXY

This response submitted by MIKE WIALND on 10/24/05 at 10:56 PM. ( ) 70.228.67.110

YOU CAN USE 5 MINUTE EPOXY TO SET EARS AND PUNCH HOLES IN YOUR LINERS THEN AIR BRUSH LIGHT PINK TO COVER HOLES.

Return to Gamehead Taxidermy Category Menu