panel for hog shoulder mount

Submitted by Brandon on 1/30/06 at 1:35 PM. ( brandoncornelius@hotmail.com ) 70.240.193.142

i mounted a 400lb. hog shoulder mount and the guy wants it on a panel with area on bottom for gun rack with the feet. my problem is.....i ordered the largest gun rack style panel i could find but it is still too small fot the hog. any body ever ran into this problem. Also, I am in Texas and was wondering if there were any local freeze dry companies. i am thinking i will have the feet frezze dried . thanks

Return to Gamehead Taxidermy Category Menu


make your own

This response submitted by paul e on 1/31/06 at 1:11 PM. ( amfpaul@bellsouth.net ) 68.222.59.234

its not that hard

p.s. if you can draw or have access to someone who knows acad
draw it up
do some research on a laser shop around you
ive drawn up some elk panels and have them roughed out with a laser
then i router the edge and stain
hope you quoted some leway on the price for this
sometimes you have to think outside the box a little
hope this helps
paul e


Return to Gamehead Taxidermy Category Menu