I've got some new forms lately that have a different surface on them. Maybe this is just wishful thinking, but do they still need to be roughed up? The old forms had the really slick surface that had to be sanded off, while these are different. One of these forms was from Ben Meers, and the other was a new McKenzie form. The old McKenzie forms had to be sanded, and I suspect these do too.
It would sure save a ton of time if I didn't have to sand and rasp all my forms. I've heard spraying them with glue works, but I've also heard this might not be a good idea. Just looking for a way to speed up my production time. So, I'd appreciate your input. Thanks....Steve
Return to Gamehead Taxidermy Category Menu
According to McKenzie this is but another technique in their quest to "perfect" to foam and moulding. There still remains small remnants of release agents on the form that must be dealt with appropriately.
Steve,
When mannikins are made the forms are waxed so that they will come out of the mould. Wax, oil, and grease will cause adhesion problems with any type glue/adhesive you use. For best results its a good idea to give the form a good tooth for the adhesive to stick to. Spraying the form with glue is questionable especially if the glues are not overly compatible or if the bond strength is compromised.
Please call me at 800-888-2467 if you would like more information.
If a supplier were to buy a sand blasting booth and prep the forms? Light pressure sand blasting works great - it opens up the 'pores' but doesn't loose the detail. I'd pay a buck more per form for this service........