this is going to be a side view of an ice fishing hole horizontally -not the kind where you look down into one. it needs to be half circle in shape flat side against the wall. it will be snow plexiglass, hole cut out to accept clear cylinder 6 or 8" in diameter then plexiglass on bottom with hole cut out to accpet the cylinder. top of plexiglass to bottom and the hole will be about 4" thick -representing thickness of the ice. here's what im stuck on 1)what to use as a backboard.2)where can i get a clear 6 or 8" tube. 3)what to use as the sides. and 4) how to cover any seams and what material to use in order to bond the tube and sides to plexiglass.
if you can understand this let me know if you have tried this or have any ideas. thanks
Return to Habitat and Exhibit Category Menu
Mk call mwe at (705)476-0483 and I will walk you through it.