i got my tanning supplies yesterday I use lutan f and i was refreshing my mind .i actually read the directions When i started tanning 6 years ago i got directions from a local taxidermist who has been showing me the ropes i have been always maintaining the ph at1.5
the vanykes directions say after mixing solution get ph at 1.5 then add skins YOU DO NOT NEED TO MAINTAIN PH AFTER SKINS HAVE BEEN ADDED
this is wrong correct could use some advise
thanks jason
Return to Tanning Category Menu
As long as you maintain a PH of 2.5 or lower you will be ok. I read the same directions the same way. I always check it every other day except for the first 24 hrs and I check it until it stabilizes.
thanks john for the help.
have a great day
I always check it. When I mix it - it should be a 1.5 PH or lower - thats if you use Saftee Acid or Oxalic Acid. Then after I add the skins to it - about 1-2 hours later I check it again. It should hold at 1.5 PH or lower - if not - I add more acid. I will also check it the next day - especially if I had to adjust it. After that I chaeck it about every other day.