1. Welcome to Taxidermy.net, Guest!
    We have put together a brief tutorial to help you with the site, click here to access it.

WT form question

Discussion in 'Beginners' started by shockme2, Nov 15, 2011.

  1. shockme2

    shockme2 New Member

    Hello,

    I have a question about a form. I have a cape that measured 6.25"X20"X22". (small buck, big a** rut neck) Now the problem I'm having is that I can't find a form that will fit. Is there any options for me to modify a form to make it fit?

    Thanks! ;D
     
  2. Mr.T

    Mr.T Active Member

    Tanned or raw size?
     

  3. shockme2

    shockme2 New Member

    Raw
     
  4. jockamoe

    jockamoe New Member

    There are all sorts of options available to you. If the dimensions are way off one way is to take sections of two forms and make one ( swap out the head ).
    Split the form down the middle and put in a spacer.Take a rasp and file to it. Be creative there is no wrong way to do it.
    Some ways may be more practical than others but basically do what you need to do to make it work
     
  5. Mike Powell

    Mike Powell Well-Known Member

    Use a change out head or get a 6 3/4" or 7" e-n form with the right neck measurements and shorten the nose a bit by cutting a section out right about the end of the lip line, glue it back and smooth the seam with a file or rasp.
     
  6. shockme2

    shockme2 New Member

    Thanks all, I really appreciate it. ;D