1. Welcome to Taxidermy.net, Guest!
    We have put together a brief tutorial to help you with the site, click here to access it.

Wanted log slab for fish

Discussion in 'Wanted' started by Bob Jungman (559) 269-3336, Apr 9, 2015.

  1. Wanted--
    I need a couple of log slabs to mount trout.
    Can't remember where I got the last ones, a few
    years ago.
    Any ideas is helpful.
    Bob Jungman
    Fresno Ca

    Best contact (559) 269-3336
    Or email: [email protected]

  2. roostinridge

    roostinridge Active Member

    Bob, I have quite a few walnut slabs in the 30 inch range, some smaller and larger. A few oak and ash. These are kiln dried and live edge slabs.

  3. ANDY

    ANDY Well-Known Member

    Find a local sawmill in your area. Around here you can get a pick-up load for $15.-
  4. Randy Miller

    Randy Miller Active Member

    What about splitting?
  5. ANDY

    ANDY Well-Known Member

    Depends on wether there off green logs or dead logs. We usually cut them in 3 or 4 ft lengths and let the sit for a few weeks and
    let them check then cut it out. Most of them are 2-3 inches thick, the ones that split very bad we just firewood them. Plus alot of
    them we spray a flat sealer on the back and edges.